Monoblock equipment

Its main characteristic is that the condensing unit is built separately to the cooling unit. The condensing unit is installed outside while cooler is installed inside the cold room. The application for these machines is very wide as their construction permits the combination of all types of compressor, condenser and cooler in the market.

Our products

Monoblock
Monoblock flujo de aire

Air distribution inside the cold room.

Wall refrigeration equipment split

Split equipment with reciprocating hermetic type compressors that operate medium and low temperature using different refrigerants. The evaporator and the condenser are delivered ready-to-use, tested and pre-charged with refrigerant. They are supplied without a pipe, you have to select the pre-loaded and insulated pipe as an optional. It has state-of-the-art electronics with touch technology as well as dehydrator filter.

Monoblock
Equipo monoblock de techo

Air distribution inside the cold room.

Monoblock ceiling unit

Split equipment with reciprocating hermetic type compressors that operate medium and low temperature using different refrigerants. The evaporator and the condenser are delivered ready-to-use, tested and pre-charged with refrigerant. They are supplied without a pipe, you have to select the pre-loaded and insulated pipe as an optional. It has dehydrator filter and electronic control unit.

KEY FEATURES

Temperatura

Operating temperature for cooling (-5/+5ºC) and freezing (-25/-15ºC)

Mando

Electronic control included

Desescarche

Defrost using hot gas.

Ventiladores

The condenser fans can be axial or centrifugal.

Eliminacion

Automatic condensation water elimination system.

Presostato

High pressure switch.

Low pressure switch.

Contact us and ask about our other variants of these refrigeration units.